MEP-B9 Handheld force indicator-MANYYEAR TECHNOLOGY

MEP-B9 Handheld force indicator

2023/10/12 Digital Instrument Force Controller 873 0

MEP-B9 Handheld force indicator

Product Description

Product Description:
The MEP-B9 Handheld force indicator is a handheld force measuring instrument used for proportional measurement, equipped with a 4-wire strain sensor. It has a 3.2 inch high-resolution color LCD display screen with a resolution of 320 x 240. This device has a standard RS232 interface, and users can choose TC-ASCII or MODBUS/RTU protocols through parameter settings. In addition, it is equipped with standard batteries and power adapters.
The measurement and control speed of the MEP-B9 handheld force measuring instrument can be set to 15, 120, 240, 480, 960, 1920 times per second (which can be set through parameters). It has an external switch input point that can be used for clearing, peeling, alarm permission, display locking, clearing peak and valley values, and capture functions (selectable through parameters).
This handheld force measuring instrument is designed to meet the needs of various industrial applications and is suitable for testing the mechanical properties of various materials such as tension, compression, and bending. Its flexibility and versatility make it an ideal choice for engineers and technicians. Whether it is quality control on the production line or fault diagnosis on site, the MEP-B9 handheld dynamometer can provide accurate and reliable measurement results, helping users make wise decisions.

we have prepared this form as below, hoping to help you.if you complete the sheet, please send to admin@manyyear.com. we will reply to you in 24Hr.

Product selection reference

Online Sales

Product Introduction Technical Documents

Product Picture Reference

digital instrument

Technology Specification

Below spec is only for customer design reference. we can provide ODM product.

Handheld force indicator

Product Description

Handheld dynamometer for ratiometric measurement with 4 -wire strain sensor.

3.2 inches 320 x 240 resolution color LCD display.

Standard RS232 interface, TC-ASCII or MODBUS/RTU protocol can be selected through parameter setting .

Standard battery and power adapter.

Measurement and control speed 15 , 120 , 240 , 480 , 960 , 1920 times per second (set by parameter).

1 point of external switch input, which can be used for zero clearing, tare removal, alarm permission, display lock, peak and valley clearing, and capture functions (selectable by parameters).

Basic Specifications

project				Specification
external power adapter				Input: AC 90 ~ 260 V, 50Hz or 60Hz Output: DC 12V / 2 A , positive inside the interface and negative outside Note: Do not use a power adapter that is not supplied with this machine
Built-in battery				The continuous use time is about 18~ 36 hours, which is related to the way of use Charging time is about 4~ 8 hours The service life is not less than 1000 times of full charge and discharge cycles
Insulation resistance				≥100 MΩ (500V DC MEGA reference). Not applicable when powered by built-in battery
Dielectric strength				2000V AC (test condition: 50/60Hz, 1 minute). Not applicable when powered by built-in battery
Anti-jamming				IEC61000-4-2 (electrostatic discharge), level Ⅲ IEC61000-4-4 (electrical fast transient burst), level Ⅲ IEC61000-4-5 (surge), level Ⅲ. Not applicable when powered by built-in battery
degree of protection				IP65 (product front panel protection) (GB/T42-2008)
operating environment		ambient temperature		- 30 ~ 60 ℃ (storage: - 40 ~ 65 ℃)
		environment humidity		35 ~ 85 %R•H , no condensation
		installation location		Indoor, height < 2000m
input signal				Ratio measurement , with 4-wire strain sensor - 14 ~ 14mV _
input sensitivity				0.1uV / d
Zero adjustment range				-10～ 10mV
Gain input range				1 ~ 12mV
conversion method				Sigma-Delta
Measurement and control speed				15, 120, 240, 480, 960, 1920 times per second (set by parameter)
nonlinear				± 0. 0 1%F•S (measurement speed 15 times/second)
gain drift				＜ 10ppm /℃ (Matching terminal connectors must be used when connecting the sensor, otherwise the temperature drift characteristics will be deteriorated)
Highest Display Accuracy				1/100000 _ _
contact input				1 point of external switch input, which can be used for zero clearing, tare removal, alarm permission, display lock, peak and valley clearing, etc. (can be selected by parameters)
DI /DO external power supply voltage				Between PD+ and PD-: + 9V ~ + 30 V
sensor power supply				DC 5V ± 2% , 1 0 0mA (MAX)
Alarm output				2 OC gate outputs, ≤ 35 mA
Communication Interface	M S1		RS232 interface, TC-ASCII and MODBUS/RTU protocol，Response time: 500 μS (measured value)
Power Specifications	V0		no built-in battery
	V1		Has a built-in battery

Code description

content	code description
MEP-B9-		Various display modes of waveform and numbers, real-time clock;
Dimensions		169×75×36.2mm
Panel Specifications		3.2-inch color LCD display (320×240)
Intelligent module (option)	TS	Smart Module Interface

Product Dimension

Product Application

apw-force-test-7

apw-force-test-6

weighing solution-cinema seats management system
Bus seat weighing solution is applicable to bus seat weighing and counting control.
wireless truck weighing system
Bus seat weighing solution is applicable to bus seat weighing and counting control.
seat weighing system solution
Bus seat weighing solution is applicable to bus seat weighing and counting control.

View all