ADS201 Multichannel digital weighing system

Product Picture Reference

ADS201 Multichannel digital weighing system

Technology Specification

Below spec is only for customer design reference. we can provide ODM product.

ADS201- 4 channel digital weighing system & digital weighing junction box

4 channel digital weighing system & digital weighing junction box
Model: ADS201
Catalog: Digital weighing junction box
Channel : 1-8 Channel
Work voltage: 9-24vdc
Signal output: RS485/232/WIRELESS
Application: platform scale, digital weighbridge, tank weighing, axle scale, process control instrument
keyword: digital weighing junction box
A single channel digital weighing J-Box Hirs-1 has all features of an AD-S module mentioned above. Besides, it can be connected to several analog load cells simultaneously and the eccentricity can be adjusted through potention meters. Suitable for hopper weighing, tank weighing, digital truck scale, industrial process weighing instruments.

Hardware Interface: RS-485 interface, half-duplex.
Software Protocol : Freeport/ Modbus RTU protocol (opt.)
Operating Voltage: 9V DC / 24V DC (opt.).
Operating current:(only module):<30ma(typical)<35mA(max)
Dimensions: 185x133x31mm
A/D conversion, digital calibration, tare, zero setting/tracking, switch-on zero setting, anti-dithering.
All the parameters can be set through serial interface.
Module addresses are available from 0 to 31. Modules can work through bus communication.
Baud rate, parity bit and data output format can be set. 1200~38400bps.
Digital filtering: standard filtering or LPF.
Lightning protection board (opt.)
Sampling speed: 3.125~400Hz.
Storage of the parameters with protection against power failure.
Complete protection: wrong wiring protection, overvoltage protection, transient voltage suppression.
Operating temperature range: -40c~+70c. Storage temperature range:-60c~+90c