MEP-CHB weighing force control instrument.

Product Description

0.05 -level measurement accuracy, 10 times per second measurement and control speed

Net weight, gross weight, peak value, valley value processing and switching display

6 alarm modes: upper limit, lower limit, deviation and range

Zero tracking, stable judgment, automatic zero clearing function when power on

Alarm status, engineering quantity unit indicator light

Choose one of communication or transmission function

we have prepared this form as below, hoping to help you.if you complete the sheet, please send to admin@manyyear.com. we will reply to you in 24Hr.

Product Picture Reference

digital instrument

Below spec is only for customer design reference. we can provide ODM product.

MEP-CHB weighing force control instrument.

Product Description

0.05 -level measurement accuracy, 10 times per second measurement and control speed

Net weight, gross weight, peak value, valley value processing and switching display

6 alarm modes: upper limit, lower limit, deviation and range

Zero tracking, stable judgment, automatic zero clearing function when power on

Alarm status, engineering quantity unit indicator light

Choose one of communication or transmission function

Basic Specifications

Basic Specifications
voltage		AC power	100-240V AC 50/60Hz
Power consumption		AC power	Below 7VA
Allowable voltage range		90 ~ 110 % of supply voltage
Insulation resistance		100M Ω or more ( 500 V DC MEGA reference)
withstand voltage		1 minute at 2000 V AC 50/ 60Hz
Anti-jamming		IEC61000-4-2 (electrostatic discharge ) , level Ⅲ;
		IEC61000-4-4 (electrical fast transient burst), level Ⅲ;
		IEC61000-4-5 (surge), level Ⅲ
degree of protection		IP65 (front part of product)
surroundings	temperature	-10 ~ 55 ℃; storage -25 ~ 65 ℃
	humidity	35 ~ 85 %RH ; save 35 ~ 85 %RH
input specifications
Measure control speed		10 times / second above
basic error		±0.05 %FS
display range		-19999~45000 , display when overloaded
input signal		Proportional measurement, equipped with 4- wire strain sensor, suitable for 0.8~3.0mV/V
output specification
Contact output		2 points, 250VAC/3A resistive load
External supply voltage		10V ± 2% , 30ppm , 150mA

Code description

content	code description
MEP-CHB-		0.05-level measurement accuracy; 10 times per second measurement and control speed
MEP-CHBE-		0.05-level measurement accuracy; 10 times per second measurement and control speed, including one transmission or communication
Dimensions	AH	160×80×125 hole size: 152×76
	CH	96×48×82 hole size: 92×45
Panel Specifications		5 LEDs (-19999～45000)
input signal		Proportional measurement, equipped with 4-wire strain sensor, suitable for 0.8-2.5mV/V
Call the police		2 relay outputs, 250V AC/3A, resistive load
Transmission (resolution: 1/3000; current output load≦600Ω, voltage output load≧100KΩ) ( CHBE only)	A1	(4-20) mA, (0-10) mA, (0-20) mA
	A2	(1-5) V, (0-5) V
	A3	(0-10)V
External power supply		10V±2%, 30ppm 150mA
Communications (CHBE only)	M1	Modbus-RTU protocol RS232
	M2	Modbus-RTU protocol RS485
Power Specifications	V0	100-240V AC 50/60Hz

Product Dimension

MEP-CTB6 force indicator

apw-force-test-7

apw-force-test-6

weighing solution-cinema seats management system
Bus seat weighing solution is applicable to bus seat weighing and counting control.
wireless truck weighing system
Bus seat weighing solution is applicable to bus seat weighing and counting control.
seat weighing system solution
Bus seat weighing solution is applicable to bus seat weighing and counting control.