MLC408 hydraulic equipment force load cell

MLC408 hydraulic equipment force load cell

2021/11/09 Force Load Cell MLC400 Column Load Cell 2383 0

compression force load cell, hydraulic equipment force load cell. tension force sensor

Model: MLC408
Category: Compression Load Cell
Range: 5t,10t,15t,20t
Dimension: 125*215mm
Material: alloy steel, stainless steel
Characteristic: compression force load cell, hydraulic equipment force load cell. tension force sensor

we have prepared this form as below, hoping to help you.if you complete the sheet, please send to admin@manyyear.com. we will reply to you in 24Hr.

Product selection reference

Sales Online

Product Introduction Product Parameters

Product Picture Reference

Technology Specification

Below spec is only for customer design reference. we can provide ODM product.

MLC408 hydraulic equipment force load cell

Model: MLC408 Category: Compression Load Cell Range: 5t,10t,15t,20t Dimension: 125*215mm Material: alloy steel, stainless steel Characteristic: compression force load cell, hydraulic equipment force load cell. tension force sensor

Specification
Comprehensive error:	0.05%FS	Output resistance:	352±5Ω
Rated output:	2.0±0.005mV/V	Insulation resistance:	≥5000MΩ(100VDC)
Non-linearity:	0.05%FS	Excitation voltage:	9~12VDC
Hysteresis:	0.05%FS	Compensated temp:	-10~+40℃
Repeatability:	0.03%FS	Use temperature:	-20~+55℃
Creep:	0.03%FS/10Min	Temp effect on zero:	0.05%FS/10℃
Zero balance:	±1%FS	Temp effect on span:	0.05%FS/10℃
Input resistance:	400±10Ω	Defend grade:	IP66 & IP68

Product Dimension

Force Structure & Assembly Reference

Product Application

weighing solution-cinema seats management system
Bus seat weighing solution is applicable to bus seat weighing and counting control.
wireless truck weighing system
Bus seat weighing solution is applicable to bus seat weighing and counting control.
seat weighing system solution
Bus seat weighing solution is applicable to bus seat weighing and counting control.

View all