MLC204FC bolt-type compression tension load cell, 0.5-20KN, stainless steel, dual overload, Φ3*2m wire, for tests & dynamometers.
Model: MLC204FC
Category: Button weighing sensor
Load range: 0-0.5,1,2,35,10,15,20KN
Size: ± 51 * 70mm
Material: stainless steel
Wire: Φ 3 * 2m
Safety overload: 150%; Extreme overload: 200%
Application: Small compression and tensile tests, small crane scales
| Technical specifications | |||
| Comprehensive error: | 0.1%FS | Output resistance: | 350±10Ω |
| Rated output: | 1.5 – 2.0 ± 10 % | Insulation resistance: | ≥5000MΩ(100VDC) |
| Nonlinearity: | 0.3%FS | Operating Voltage: | 0~10VDC |
| Lag: | 0.1%FS | Compensation temperature: | -10~+40ºC |
| Repeatability: | 0.1%FS | Operating temperature: | -20~+55ºC |
| Creep: | 0.2%FS/30min | Effect of Temp. on zero point: | 0.1%FS/10ºC |
| Zero Balance: | ±2%FS | Effect of Temp. on sensitivity: | 0.1%FS/10ºC |
| Input resistance: | 350±10Ω | Protection level: | IP66 |
