Pin-type Load Cell (2-100t, dual sizes) for heavy cranes—alloy/stainless steel, ideal for overload limiters, safe and accurate.
Model: MLC162
Category: Bridge load cell
Range: 2,3,5,10,15,20,30,40,50,100t
Dimensions: ± 58 * 128mm, ± 68 * 128mm
Material: alloy steel, stainless steel
Characteristic: safety limiter load cell, overload load cell, pin load cell, pin force sensor
| Technical specification | |||
| Comprehensive error | 0.5%FS | Output resistance | 702±5Ω |
| Rated output | 1.0±0.005mV/V | Insulation resistance | ≥5000MΩ(100VDC) |
| Nonlinear | 0.05%FS | Operating voltage | 5~12VDC |
| Hysteresis | 0.05%FS | Compensation temperature | -10~+40 ℃ |
| Repeatability | 0.03%FS | Operating temperature | -20~+55 ℃ |
| Creep | 0.03%FS/10Min | Effect of Temp. on zero point: | 0.05%FS/10 ℃ |
| Zero output | ±1%FS | Effect of Temp. on sensitivity: | 0.05%FS/10 ℃ |
| Input resistance | 750±10Ω | Protection level | IP66 & IP68 |
The prev: MLC161 Pin-type Load Cell 2-4t The next: MLC165 Pin-type force Load Cell 750t
